INP1011
Ultra-Low Power Wi-Fi 802.11 b/g/n BLE 5.0 RF Module, U.FL Connector
| INP1011- InnoPhase IoT - Ultra-Low Power Wi-Fi 802.11 b/g/n BLE 5.0 RF Module, Ceramic Chip-Antenna | |
| Technology | WiFi + Bluetooth |
| Application | Smart Door Locks, Remote Security Cameras, Connected Sensors |
| Frequency | 2.412 to 2.472 GHz |
| Bluetooth Standards | Bluetooth v5 |
| WiFi Standards | 802.11 b/g/n |
| Mesh Networking | No |
| Data Rate | 1 to 11 Mbps |
| Supply Voltage | 2.6 to 3.6 V |
| Current Receiving | 31 to 34 mA |
| Current Transmitting | 81 to 178 mA |
| Sleep current | 11 to 19 µA |
| Output Power | 12.5 to 17.5 dBm |
| Integrated Antenna | Yes |
| Antenna | U.FL Connector |
| Interface Type | HCI, SPI, UART |
| Memory | 512KB SRAM, 2MB Flash |
| Processor | Arm Cortex-M3, 80MHz |
| Chip | 3.3 V |
| Dimension | 21.6 x 19.1 x 2.5 mm |
| Operating Temperature | -40 to 85 Degree C |
| Storage Temperature | -40 to 125 Degree C |
| RoHs | Yes |
PRODUCT DETAILS
- Ultra-low power 2.4GHz 802.11 b/g/n Wi-Fi connectivity
- DTIM10 at 57uA enables connected battery-based applications
- Full stack including MQTT, mbedTLS for supporting IoT Direct-to-Cloud for a variety of cloud services (AWS, Azure, Google Cloud, IBM Watson, etc.)
- BLE5.0 w/ Advanced Features LE Coding/FEC (Long-Range), 2M PHY, Extended Advertising
- Supports Wi-Fi Provisioning over BLE and local device management, plus BLE to Wi-Fi bridging
- Bluetooth GATT/GAP Profile support, and HCI interface option for host MCU-based BLE profile stacks
- Advanced security features including Secure Boot, PUF (Physically Unclonable Function) and hardware Crypto Engines
- Embedded 80MHz Arm Cortex-M3 w/ 512KB SRAM and 2MB Flash
- Host Interface over SPI or UART using InnoPhase HIO API (HAPI) C library or AT Commands
- Twelve (12) configurable GPIO
- Dedicated ADC Input pin
- Integrated clocks and power management – only a single 3.3V supply needed
- U.FL antenna connector
